AMSEC BFII Gun Safe Comparison Chart:

Model	AMSEC BFII6024	AMSEC BFII6032	AMSEC BFII6030	AMSEC BFII6636	AMSEC BFII7240	AMSEC BFII7250
Height	59-1/4"	59-1/4"	59-1/4"	65-1/4"	71-1/4"	71-1/4"
Width	24"	30"	30"	36"	40"	50"
Depth	21"	21"	26"	26"	26"	28"
Overall Depth (Including Lock & Handle)	23-3/4"	23-3/4"	28-3/4"	28-3/4"	28-3/4"	30-3/4"
Gun Capacity	8-8-16 Gun + 1 Gun = 17 Total Capacity	9-9-18 Gun + 2 Gun = 20 Total Capacity	11-11-22 Gun + 2 Gun = 24 Total Capacity	12-12-24 Gun + 2 Gun = 26 Total Capacity	12-12-12-24-36 Gun + 2 Gun = 38 Total Capacity	14-14-14-28-42 Gun + 2 Gun = 44 Total Capacity
Weight (lbs)	1067	1244	1395	1716	1991	2438
Locking Bolts / Diameter	10 / 1-1/2"	10 / 1-1/2"	10 / 1-1/2"	10 / 1-1/2"	10 / 1-1/2"	10 / 1-1/2"

Amsec BFII Gun Safe Features:

1 Safe Body:

• Body encloses a proprietary DryLight insulation eliminating the use of gypsum board
• Two-inch total wall thickness on all sides
• 5/16" Inner Steel Liner
• Two layers of steel (an outer and inner steel liner filled with the DryLight insulation material) for dual security protection
• Four pre-cut anchor holes and one pre-cut electrical access hole
• Awarded the UL RSC Level II Burglary test which is essentially a TL-10 rating meaning it survived the same tools used on TL rated safes but for a time of 10 minutes.

2 Safe Door:

• 1/2-inch steel plate door (3/8 inch on the BF-7250) combined with one-inch DryLight insulation
• Ten massive 1-1/2” thick locking bolts to provide superior door security
• Commercial grade high-security exterior hinges for additional security and full access to the elegant interior
• Equipped with a UL-listed Group I lock protected by a massive active hard-plate
• Same high security boltwork found on the TL rated safes
• Bolt detent system holds bolts in the open position preventing damage to bolt work and body

3 Unmatched Fire Protection:

• Mercury Class II fire protection of 1275 degrees for 120 minutes is designed to maintain an interior temperature of less than 350 degrees
• New DryLight insulation is poured between inner and outer steel walls for premier fire protection
• Dual fire seals around entire door - silicon seal on the door jamb and Palusol seal on door - giving the door a snug fit with added fire protection
• Palusol seal expands seven times its original thickness when exposed to heat

---

4 Quality and Style Throughout:

• Premium door organizer standard on all sizes
• Unique mirrored back wall in the interior of the safe provides higher interior visibility
• Bold zinc die cast polished brass or chrome logos
• Decorative three-spoke handle
• Interior shelves fully upholstered in a pin-dot fabric
• Interior shelving can be adjusted to meet your unique storage needs
• Interior door panel adds plenty of extra storage capability
• Select from seven hand-painted high-gloss finishes and seven textured finishes

American Security's BFII gun safes come standard with a neat pistol storage system. It stores several pistols, two rifles, two rows of holders for storage of choke tubes, small flashlights and ammo. It also has several see-through pouches and zippered pockets to store valuables. Keep the interior of your safe organized with this door accessory kit that comes standard on the BFII Series by Amsec.

AMSEC BF Series Available Exterior Colors:

AMSEC BF Series Available Hardware Colors:

Compare AMSEC Gun Safe Series: